How to check a used Android phone before you buy it
The checks that catch a locked, stolen or worn out handset in ten minutes, what to ask before you meet, and how to read the phone itself rather than the seller's description.
By Hasnain · XLUNA™ ·
A used phone can be a very good buy, or a locked brick with a tired battery. The difference is usually visible in about ten minutes if you know where to look, and almost none of it depends on trusting the seller's description.
Before you meet
- Ask for the exact model and storage size. Many phones come in several versions that look identical. The model number is in Settings, About phone.
- Ask for the IMEI. It is the phone's identity number. You can check it with your network or a reputable checking service to see whether it has been reported lost or stolen, or is blocked for unpaid bills.
- Ask which Android version and security update it has. A phone that no longer receives updates is cheaper for a reason.
- Meet somewhere with Wi-Fi and a charger, and bring your own SIM card.
The check that matters most: the account lock
Android phones have a protection that ties a reset phone to the last Google account signed in. If the seller has not removed their account before resetting it, the phone will ask for that account's password after setup, and you will not be able to use it. This is the single most common way people end up with a phone they cannot use.
- Ask the seller to open Settings and remove their Google account, and any maker account such as a Samsung account, in front of you.
- Then ask them to factory reset the phone, again in front of you.
- Start the setup yourself until it asks you to sign in. If it asks for the previous owner's account instead, do not buy it.
Battery condition
A battery loses capacity as it ages, and a replacement is one of the more expensive repairs. Some phones now show battery health or charge cycles in their settings, under Battery or About phone. Many do not, and only the maker's own tools or a connected PC can read it. If nothing shows it, watch how quickly the level drops while you test the phone, and check that it charges when you plug it in. A battery that bulges, so the back or screen lifts at an edge, is a firm reason to walk away.
Security updates
In Settings, look for the Android security update date, usually under About phone or Security. A date within the last few months means the phone is still being looked after. A date more than a year old means it probably is not, and the phone will become less safe to use for banking and payments as time goes on.
The physical checks
- Open a plain white image and then a plain grey one at full brightness. Look for dead pixels, yellow patches and faint ghost images of the keyboard or status bar, which are signs of screen burn-in.
- Test the touchscreen by dragging an app icon slowly across every part of the screen.
- Make a call with your SIM. Check both speakers, the earpiece and the microphone.
- Take a photo with every camera, front and back, and record a few seconds of video.
- Plug in a charger and wiggle the cable gently. A loose charging port is a common fault.
- Test the buttons, the fingerprint reader, Wi-Fi and Bluetooth.
- Check the storage in Settings matches what you were told.
Signs to walk away
- The seller will not remove their account or reset the phone in front of you.
- The IMEI on the box, the SIM tray and in Settings do not match.
- The phone is much cheaper than similar ones and the seller is in a hurry.
- The battery is swollen, or the phone gets hot just sitting idle.
Reading the phone on a PC
Settings only shows what the maker chooses to show. Connected to a PC with USB debugging switched on, a phone can report a lot more: battery level and condition where the phone exposes it, temperature, memory, the exact chipset and how it starts up. It is also the quickest way to see every installed app and what each one can access, which matters if you intend to keep the phone as it is rather than resetting it.
How XLUNA Mobile Lab handles this
Connect a handset to your PC with USB debugging turned on, and the XLUNA Mobile Lab dashboard reads it straight away: battery level and condition, storage, memory, temperature, chipset, Android version, security patch and how it starts up. Where a handset keeps a reading private, the app says so instead of guessing. A security audit scores every installed app on where it came from and what it can reach, and you can back up photos and files to your PC before you change anything. Everything you copy stays on your PC, with no account and no cloud.